• NVMe drive failure

    From poindexter FORTRAN@VERT/REALITY to All on Sat Oct 3 08:52:05 2026
    My wife's desktop PC failed to boot; after a couple of times it came
    back to life. I backed it up, then a couple of days later it failed
    again.

    Odd, the fans spin and change speed, like it's going through POST- but
    no video.

    What I learned is that NVMe drives, since they're directly attached to
    the PCI bus, can prevent boot when they fail - as opposed to a SATA
    drive, which just doesn't appear. With SATA, the system will POST, then
    fail to boot with a "boot device not found" message.

    I would have thought it was the power supply or a bad motherboard at
    first glance. Glad I took the drive out to reseat it and saw it boot to
    setup without the drive in it.

    I was going to replace it with a SATA drive, but I don't see a place to
    mount it. She doesn't need NVMe speed and those tiny 2230 SSDs are
    expensive.





    ... Don't give Chad a big neural network
    --- MultiMail/Win v0.52
    þ Synchronet þ .: realitycheckbbs.org :: scientia potentia est :.
  • From Mortar@VERT/EOTLBBS to poindexter FORTRAN on Sat Oct 3 12:36:36 2026
    Re: NVMe drive failure
    By: poindexter FORTRAN to All on Sat Oct 03 2026 08:52:05

    I would have thought it was the power supply...

    If that were the case, you wouldn't have heard the fans spin up, or anything else for that matter. PSUs tend to go out with a bang (literally) instead of a wimper.

    ---
    þ Synchronet þ End Of The Line BBS - endofthelinebbs.com
  • From nelgin@VERT/EOTLBBS to poindexter FORTRAN on Sat Oct 3 16:00:52 2026
    On Sat, 3 Oct 2026 08:52:05 -0700
    "poindexter FORTRAN" (VERT/REALITY) <VERT/REALITY!poindexter.FORTRAN@endofthelinebbs.com> wrote:

    My wife's desktop PC failed to boot; after a couple of times it came
    back to life. I backed it up, then a couple of days later it failed
    again.

    Odd, the fans spin and change speed, like it's going through POST- but
    no video.

    What I learned is that NVMe drives, since they're directly attached to
    the PCI bus, can prevent boot when they fail - as opposed to a SATA
    drive, which just doesn't appear. With SATA, the system will POST,
    then fail to boot with a "boot device not found" message.

    I would have thought it was the power supply or a bad motherboard at
    first glance. Glad I took the drive out to reseat it and saw it boot
    to setup without the drive in it.

    I was going to replace it with a SATA drive, but I don't see a place
    to mount it. She doesn't need NVMe speed and those tiny 2230 SSDs are expensive.

    Per gb they're expensive but you can get a 256gb from Amazon for $60.
    Does it have to be 2230?

    Also, you don't have to be able to mount of SSD drive, assuming that's
    what you mean by SATA these days? Unless a spinning disk, it doesn't
    need to be bolted down and it really doesn't care on its orientation.
    As long as you're not moving your system around it should be fine lying
    on the bottom of the case.
    --
    End Of The Line BBS - Plano, TX
    telnet endofthelinebbs.com 23
    ---
    * Synchronet * End Of The Line BBS - endofthelinebbs.com
  • From MRO@VERT/BBSESINF to Mortar on Sat Oct 3 22:20:21 2026
    Re: NVMe drive failure
    By: Mortar to poindexter FORTRAN on Sat Oct 03 2026 12:36 pm

    Re: NVMe drive failure
    By: poindexter FORTRAN to All on Sat Oct 03 2026 08:52:05

    I would have thought it was the power supply...

    If that were the case, you wouldn't have heard the fans spin up, or anything else for that matter. PSUs tend to go out with a bang (literally) instead of > a wimper.

    Well in my experience they go out with an ozone smell.
    I'm not so sure about his nvme theory.

    --
    https://i.imgur.com/MNKA5U0.png
    President of BBS Sysop's Union +++ https://bbses.info/union
    ---
    þ Synchronet þ ::: BBSES.info - free BBS services :::