Fans were held in place by 4 nylon screws per fan. Removed the fans,
did a deep de-dusting of the fans, heat sinks and inside the chassis,
then carefully removed the labels from the fans and put 2 drops
of oil into each fan's axle.
Everything went back together, the fans are quieter, the fan that would
stop working momentarily is working normally, and I didn't break
anything or have screws left over!
Sysop: | Tetrazocine |
---|---|
Location: | Melbourne, VIC, Australia |
Users: | 7 |
Nodes: | 8 (0 / 8) |
Uptime: | 185:59:08 |
Calls: | 46 |
Files: | 21,492 |
Messages: | 63,300 |