I recompiled sbbs and there were 2 lines at the end that show something must be wrong (or I did something wrong)

chown: cannot access '/home/sbbs/shared-drives': Permission denied
make: [GNUmakefile:238: install] Error 1 (ignored)

Also, I went back throuigh the compile and there were several warnings. A lot of them concerned "js_static_assert##" (where ## is a number) locally defined but not used
--- SBBSecho 3.11-Win32
* Origin: Ice Castle BBS, Anchorage, AK (1:153/143)
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net

Re: recompile
By: Ghost to Digital Man on Fri Sep 30 2022 03:02 pm

I recompiled sbbs and there were 2 lines at the end that show something must be wrong (or I did something wrong)

chown: cannot access '/home/sbbs/shared-drives': Permission denied
make: [GNUmakefile:238: install] Error 1 (ignored)

Where does this 'shared-drives' come from? Not something I recognize.

Also, I went back throuigh the compile and there were several warnings. A lot of them concerned "js_static_assert##" (where ## is a number) locally defined but not used

You can ignore those.
--
digital man (rob)

Synchronet "Real Fact" #58:
The last version of Synchronet to run on MS-DOS and OS/2 was v2.30c (1999) Norco, CA WX: 63.0øF, 88.0% humidity, 3 mph SSW wind, 0.00 inches rain/24hrs ---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net

Re: recompile
By: Digital Man to Ghost on Fri Sep 30 2022 09:52 pm

make: [GNUmakefile:238: install] Error 1 (ignored)

Where does this 'shared-drives' come from? Not something I recognize.

Also, I went back throuigh the compile and there were several warnings. A lot of them concerned "js_static_assert##" (where ## is a number) locally defined but
not used

You can ignore those.
--
digital man (rob)

OK, so that problem was fixed after I recompiled. Apparently I missed something in the required files. Anyway, now, when I type ./sbbs, it starts. I was thinking I would have a GUI as on windows, but all I get is a line saying web server started and a line below it showing threads,sockets, clients, etc
One question I have now is where/how do I set the sbbsctrl environment variable?
--- SBBSecho 3.11-Win32
* Origin: Ice Castle BBS, Anchorage, AK (1:153/143)
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net

Re: recompile
By: bove is what I am getting to Nightfox on Sat Oct 01 2022 02:54 pm

Thanks. I appreciate your assistance. I know it may be bothersome, and I am looking up most of the questions I have online. That being said, I have a book coming, but it is not available locally so I have to wait till it arrives.

Is your username really "bove is what I am getting"?

Nightfox

---
þ Synchronet þ Digital Distortion: digitaldistortionbbs.com

Re: recompile
By: bove is what I am getting to Digital Man on Fri Sep 30 2022 09:54 pm

Re: recompile
By: Digital Man to Ghost on Fri Sep 30 2022 09:52 pm

make: [GNUmakefile:238: install] Error 1 (ignored)

Where does this 'shared-drives' come from? Not something I recognize.

Also, I went back throuigh the compile and there were several warnings. A lot of them concerned "js_static_assert##" (where ## is a number) locally defined but not used

You can ignore those.
--
digital man (rob)

OK, so that problem was fixed after I recompiled. Apparently I missed something in the required files. Anyway, now, when I type ./sbbs, it starts. I was thinking I would have a GUI as on windows, but all I get is a line saying web server started and a line below it showing threads,sockets, clients, etc

sbbs on Linux is a console mode program, just like sbbs.exe on Windows is. Run gtkmonitor if you want a GUI monitoring experience similar to the Synchronet Control Panel for Windows (sbbsctrl.exe).

One question I have now is where/how do I set the sbbsctrl environment variable?

https://wiki.synchro.net/config:env
--
digital man (rob)

Sling Blade quote #12:
Karl (re hammer): I don't rightly know. I just kinda woke up holding it.
Norco, CA WX: 80.5øF, 54.0% humidity, 3 mph S wind, 0.00 inches rain/24hrs
---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net

Re: recompile
By: Nightfox to bove is what I am getting on Sun Oct 02 2022 10:31 am

Re: recompile
By: bove is what I am getting to Nightfox on Sat Oct 01 2022 02:54 pm
Is your username really "bove is what I am getting"?

Nightfox

No, and I'm not sure how that got there
--- SBBSecho 3.11-Win32
* Origin: Ice Castle BBS, Anchorage, AK (1:153/143)
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net

Re: recompile
By: Digital Man to bove is what I am getting on Sun Oct 02 2022 02:21 pm

One question I have now is where/how do I set the sbbsctrl environment variable?

https://wiki.synchro.net/config:env
--
digital man (rob)

Thanks, Rob. But now I have another question. I have searched for an answer but have had no luck locating one. I tried to open GTKmonitor and it opens but I get an environment error and have not been able to figure out what I need to fix it. Any help is appreciated.
--- SBBSecho 3.11-Win32
* Origin: Ice Castle BBS, Anchorage, AK (1:153/143)
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net

Nightfox wrote to bove is what I am getting <=-

Re: recompile
By: bove is what I am getting to Nightfox on Sat Oct 01 2022
02:54 pm

Thanks. I appreciate your assistance. I know it may be bothersome, and I am looking up most of the questions I have online. That being said, I have a book coming, but it is not available locally so I have to wait till it arrives.

Is your username really "bove is what I am getting"?

Pretty sure that was once the Subject Line ("The above is what I am
getting"). It's got to be related to his quoting/composing/sending
skillz... something got copy/pasted wrong is my guess.



... He does the work of 3 Men...Moe, Larry & Curly
--- MultiMail/Linux v0.52
þ Synchronet þ Palantir BBS * palantirbbs.ddns.net * Pensacola, FL

Re: recompile
By: bove is what I am getting to Digital Man on Sun Oct 02 2022 04:56 pm

Re: recompile
By: Digital Man to bove is what I am getting on Sun Oct 02 2022 02:21 pm

One question I have now is where/how do I set the sbbsctrl environment variable?

https://wiki.synchro.net/config:env

Thanks, Rob. But now I have another question. I have searched for an answer but have had no luck locating one. I tried to open GTKmonitor and it opens but I get an environment error and have not been able to figure out what I need to fix it. Any help is appreciated.

What's the environment error?
--
digital man (rob)

Synchronet/BBS Terminology Definition #66:
SBBS = Synchronet Bulletin Board System
Norco, CA WX: 68.0øF, 75.0% humidity, 6 mph S wind, 0.00 inches rain/24hrs
---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net

Re: recompile
By: Digital Man to bove is what I am getting on Sun Oct 02 2022 08:29 pm

Thanks, Rob. But now I have another question. I have searched for an answer but have had no luck locating one. I tried to open GTKmonitor and it opens but I get an
environment error and have not been able to figure out what I need to fix it. Any help is appreciated.

What's the environment error?
--
digital man (rob)

That's the problem. All the popup says is "environment error" I think I have that fixed (somewhat) but now GTK monitor is running extremely slow.
--- SBBSecho 3.11-Win32
* Origin: Ice Castle BBS, Anchorage, AK (1:153/143)
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net

Re: recompile
By: Digital Man to Ghost on Mon Oct 03 2022 10:48 am

What's the environment error?

That's the problem. All the popup says is "environment error" I think I have that fixed (somewhat) but now GTK monitor is running extremely slow.

I didn't write it, but gtkmonitor does appear to contain this code with that error message, but a bit more detail that should've been displayed as well:
if(!isdir(ctrl_dir)) {
display_message("Environment Error",
"SBBSCTRL does not point to a directory","gtk-dialog-error");
return(-1);

Well, I have SBBSCTRL=/sbbs/ctrl in environment, which fixed my other problem I was having. I am getting a different error today on GTKmonitor. "Cannot create .ini file" Since I don't know where it is trying to create it, I'm not sure what to do about it. I will check online for a solution to this problem when I get done here.
--- SBBSecho 3.11-Win32
* Origin: Ice Castle BBS, Anchorage, AK (1:153/143)
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net

Ghost wrote to Digital Man <=-

Re: recompile
By: Digital Man to Ghost on Mon Oct 03 2022 10:48 am

What's the environment error?

That's the problem. All the popup says is "environment error" I think I

h

ave that fixed (somewhat) but now GTK monitor is running
extremely slow.

I didn't write it, but gtkmonitor does appear to contain this code with that

error message, but a bit more detail that should've been
displayed as well:

if(!isdir(ctrl_dir)) {
display_message("Environment Error",
"SBBSCTRL does not point to a directory","gtk-dialog-error");
return(-1);

Well, I have SBBSCTRL=/sbbs/ctrl in environment, which fixed my
other problem I was having. I am getting a different error today
on GTKmonitor. "Cannot create .ini file" Since I don't know where
it is trying to create it, I'm not sure what to do about it. I
will check online for a solution to this problem when I get done
here.

Sounds like it's referring to gtkmonitor.ini which is located in
/sbbs/ctrl.

Almost certainly a permissions issue on that directory. We're back to
the fundamental questions about knowing some Linux basics...

In a terminal, while in the /sbbs directory, type: 'ls -l'

Your 'ctrl' directory should appear like this:

drwxr-xr-x 7 danc danc 4096 Oct 3 21:31 ctrl/

Now obviously where you see 'danc' in that line it's specific to my installation, yours should show the user you are running SBBS as. If it doesn't look like that, that's the problem. You can fix that (probably)
by typing 'chmod 755 ctrl' while in the /sbbs directory.

If that is needed, I fear you have similar problems with other
directories...



... All the easy problems have been solved.
--- MultiMail/Linux v0.52
þ Synchronet þ Palantir BBS * palantirbbs.ddns.net * Pensacola, FL

Re: recompile
By: Ghost to Digital Man on Mon Oct 03 2022 03:59 pm

Re: recompile
By: Digital Man to Ghost on Mon Oct 03 2022 10:48 am

What's the environment error?

That's the problem. All the popup says is "environment error" I think I have that fixed (somewhat) but now GTK monitor is running extremely slow.

I didn't write it, but gtkmonitor does appear to contain this code with that error message, but a bit more detail that should've been displayed as well: if(!isdir(ctrl_dir)) {
display_message("Environment Error",
"SBBSCTRL does not point to a directory","gtk-dialog-error");
return(-1);

Well, I have SBBSCTRL=/sbbs/ctrl in environment, which fixed my other problem I was having. I am getting a different error today on GTKmonitor. "Cannot create .ini file" Since I don't know where it is trying to create it, I'm not sure what to do about it. I will check online for a solution to this problem when I get done here.

From the code in gtkmonitor.c, it appears it's trying to create/write-to gtkmonitor.ini in your ctrl directory. Sounds like either the ctrl directory path is wrong or the user you're running gtkmonitor as does not have write permissions to that directory.
--
digital man (rob)

This Is Spinal Tap quote #6:
David St. Hubbins: He was the patron saint of quality footwear.
Norco, CA WX: 63.2øF, 87.0% humidity, 0 mph ENE wind, 0.00 inches rain/24hrs ---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net