Reply-To:
spam@flippers.com
On 2016/03/04 10:01 a.m., John Robertson wrote:
On 03/04/2016 8:42 AM, lawsongps57@gmail.com wrote:
Is the CPU the 4CIC1/ST6225?
Are those chips available?
I have no stock on them, but will check with Germany. I am not certain
that this is the problem though.
I suggest you call Rod, he knows a lot more about those amplifiers and probably has that part in his stock.
John :-#)#
PS, tell him I said "Hi!"
Turns out the problem was the Zener diode 1ZD (3.3V) on terminal 3 of
the 8.3VDC voltage regulator 1IC1 (7805). This probably shorted pulling
the 8.3V down to 5VDC, too low for the circuits to work properly.
Replace that Zener Diode before doing anything else. A 1N4728A (1W 3.3V) should be OK, but I don't have the parts listing for the diode so that
is a guess...won't hurt to use a higher wattage zener diode (1.5 to 3W)
if the leads fit in the holes.
Thanks to Dietmar of Wurlitzer Germany (ex Deutsche Wurlitzer factory
repair) for that solution!
John :-#)#
--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd.
#7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
(604)872-5757 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."
--- MBSE BBS v1.0.8 (Linux-x86_64)
* Origin: A noiseless patient Spider (3:633/280.2@fidonet)