• Packet

    From Alan Beck@1:229/426.36 to All on Tue May 2 11:05:55 2023
    //Hello All,//

    Packet radio BBSes are only for confirmed Ham radio operators. it is of and about ham radio for hams.

    Usually you need to come in from RF, all I have are 1000 packet messages from the internet links from 3 other BBSes.

    Software is BPQ.

    I check it every day or so.

    All I do is get on the bbs by typing bbs at the first prompt, then "lm" for list mine to get my personal maail.

    Regards,
    Alan Beck
    --- WinPoint 415.0
    * Origin: Another Random *WinPoint* Origin! (1:229/426.36)
  • From Daryl Stout@1:2320/33 to Alan Beck on Wed May 3 01:57:00 2023
    Alan,

    Packet radio BBSes are only for confirmed Ham radio operators. it is of and about ham radio for hams.

    Usually you need to come in from RF, all I have are 1000 packet
    messages from the internet links from 3 other BBSes.

    First, packet is not what you do to a TNC to put it into your vehicle
    to take it to a hamfest flea market (hi hi).

    Second, there are some packet BBS's that offer telnet access in addition
    to conventional RF. Either way, one must be a licensed amateur radio
    operator to access them. The former N0KFQ BBS in Branson, Missouri (he
    and his XYL, KB0WSA, are both Silent Keys), and the current NS2B BBS
    in Penfield, New York, offer both RF and telnet access...RF for those
    who come in via HF or VHF, and telnet for those who don't have RF gear
    due to medical issues (I'm a heart patient), or they're too far away
    to access it.

    The best way to get that is using the Outpost Packet Program suite, by
    Jim Obenhofer, KN6PE. It has a separate ipserial and iptelnet utility, depending on whether you're going through RF with a TNC, or via telnet
    without any RF gear. I use the iptelnet utility to access the NS2B BBS,
    for my packet stuff, as well as running The PCL Net (I'm Net Control and Scribe, with NS2B as alternate Net Control and Scribe, when I can't be
    there). You can get the Outpost program (Windows) at outpostpm.org

    There are 2 files at http://www.wx4qz.net/elk.htm -- telling how to
    set up Outpost for accessing the NS2B BBS, and info on "The PCL Net".
    "PCL" was the original name of the net, as it was basically 3 greater
    than signs >>> used to indicate that one was done typing their comments;
    the equivalent to "over" on phone, or "K" on CW.

    It stood for "Patience Chicken Lips"...because packet is slow (300 baud
    for HF and 1200 baud for VHF), and the 3 greater than signs look like
    "chicken lips". (hi hi).

    The PCL Net meets every Monday at 8pm US Eastern Time, except on the
    weeks that have the following holidays...Easter, Memorial Day,
    Independence Day, Labor Day, Thanksgiving, Christmas, and New Years.

    We usually have 2 rounds for comments, and I usually post out the
    scribe later that evening (after I run the HotSpot RPi SBC ZumSpot Net
    on the QuadNet Array (openquad.net)), or sometime the next morning.

    As a side note, another PDF file on that page was a "review" of what
    I called "The E.D. Net"...it was one of the funniest experiences I ever
    had in ham radio. It proves "with friends like us, you don't need any
    enemies" (hi hi).

    Years ago, Dave Perry, W4KGU (SK), released five 16-bit ham radio
    doors, which had the following things in common:

    1) They were freeware.
    2) They required a DORINFO1.DEF dropfile.
    3) They did NOT have a fossil driver.
    4) They required ANSI graphics to access.
    5) If using the QRZDOOR (item C below), they needed the data CD, noted
    below.

    Here's a quick description of each of them:

    A) BULLET -- a bulletins related door. 26 categories are available, and
    it can be covering any topic...ham radio, weather, health, BBS related, food/cooking, etc. As with the REGSCAN door (noted below), the text had
    to be in 80x24 format per page.

    B) REGSCAN -- a door that had an ASCII copy of Part 97 of the FCC Rules,
    where you could search for a certain part of the rules. It needed to be formatted to basically an 80x24 page format. That was a tedious process
    to go through to convert that...although I think most PDF viewers will
    allow you to save the PDF to a textfile. But, it still took awhile to go through the entire file to get the 80x24 format.

    Offhand, I don't recall the last time there was a major update, but I'll
    take care of that again eventually. As a side note, with "suspect glaucoma" and dry corneas, which caused blurred vision without warning (that caused
    me to give up driving, and sell my car a year ago), it makes it hard to
    spend long amounts of time at the computer, with the BBS, or with running
    ham radio traffic nets.

    C) QRZDOOR -- a door that used the original CD-ROM that was produced by
    the QRZ.COM website, and was available for purchase. That data is no
    longer available, so unless you have an older data file (the last one I
    have for that was from 2008), that door is worthless. You could search
    by callsign, name, or location, and save the info to a file for download.

    D) WASPORT -- a door to track ones progress in the ARRL WAS (Worked
    All States) award. Categories were for various bands and modes, plus
    a separate Sysop defined category.

    I have "internet" for VoIP related modes...mainly for hams living in
    HOA's, CC&R's, or with antenna restrictions/prohibitions, such as
    medical or assisted living facilities. As an FCC official noted years
    ago, "we are communicators first, and ham radio operators second".
    With having congestive heart failure, I operate "internet only", but
    my license isn't just a piece of paper. I've known many hams who
    studied to the exam, got their ham radio license, but never got on
    the air. I have to wonder why they spent all that time and money.

    Just over a month ago, on March 31, 2023, when a nearly EF-4 tornado
    blasted a 35 mile path of destruction across central Arkansas (54
    injuries and 1 fatality), the hams were using "whatever communications
    method worked" to get the info to the National Weather Service in
    Little Rock. If you go on YouTube, and look for "Ryan Hall, Ya'll"
    (it's a weather geeks paradise), search for "March 31, 2023 outbreak".

    Just after 2pm Central Time, a Tornado Warning was issued for the
    Little Rock Metro area...then it was upgraded to a Tornado Emergency,
    just over 25 minutes later. You will see video of the monster tornado
    (which was about 5 miles west of me in southwest Little Rock), from
    both storm chaser Brett Adair, and from the camera from one of the
    hospitals in west Little Rock. The WCM (Warnings Coordination
    Meteorologist) at the National Weather Service in North Little Rock
    (they're at the North Little Rock Airport) is Dennis Cavanaugh,
    KF5VHZ...and he does the Skywarn Spotter Training courses done by
    the National Weather Service in North Little Rock.

    E) ARPD -- a door to work with a TNC (preferably the long gone MFJ
    1270 series) and a rig, to allow users to access packet from the
    Sysop's TNC. The callsign was changed from the Sysop to the user (a
    separate validation file was created by the Sysop to be sure that
    only licensed hams accessed the door), which then created a logfile,
    to record all commands typed. It made the user accountable for their transmissions. It also allowed users to use the mailbox that the TNC
    had, to leave a packet style message to the Sysop. When the user
    exited the door, the data for the TNC was reset back to the default
    values (i.e. the Sysop's callsign, etc.).

    For Doors A and B above, having an amateur radio license, for the user
    or Sysop, was not required. However, for Doors C through E, the Sysop and
    the user had to have the appropriate class of amateur radio license...and
    I felt that the ham radio info should be accessed only by hams...although
    most callsign servers are accessible by anyone on the internet. There are
    some countries, where the ham radio operator has requested that "their
    info not be made public".

    Except for the ARPD door (I still have the TNC, but no rig, cable, or antenna for it), the others are on my BBS, and available for download,
    in ZIP file format.

    For the doors, you can run them under Synchronet with its DOSXTRN
    utility, and set it up as if it was a regular door (again, using the DORINFO1.DEF dropfile), to get the correct user name...just set it
    for UART access.

    For Doors A through C noted above, you could use the DOORWAY utility (originally created by Marshall Dudley, now supported by Mike Ehlert),
    and then create a generic DORINFO1.DEF dropfile with the comport at 0
    (zero), and John Doe as the user. However, doors D and E require the
    dropfile with the user name to work properly.

    Daryl, WX4QZ, Sysop
    The Thunderbolt BBS, Little Rock, Arkansas

    ... Ham Radio QRP: When you care the most to send the very least.
    === MultiMail/Win v0.52
    --- SBBSecho 3.20-Win32
    * Origin: The Thunderbolt BBS - Little Rock, Arkansas (1:2320/33)
  • From Alan Beck@1:229/426.36 to Daryl Stout on Fri May 5 08:20:56 2023
    //Hello Daryl,//

    Thanks for your notes on packet.

    Unfortuenatly I can only offer Telnet access via a terminal on my web page (cwnet.org).

    It is just like the old daysworkiing from a terminal.

    If you can configure outpost to do telnet.

    I would be glad to include you on my bbs. Just send me a password via netmail and off you go.

    Should be 1000 messages on the bbs, it was once at 3500.

    73,

    Alan



    on *03.05.23* at *6:57:00* You wrote in area *AMATEUR_RADIO*
    to *Alan Beck* about *"Re: Packet"*.

    Alan,

    Packet radio BBSes are only for confirmed Ham radio operators. it is of
    and about ham radio for hams.

    Usually you need to come in from RF, all I have are 1000 packet messages
    from the internet links from 3 other BBSes.

    First, packet is not what you do to a TNC to put it into your vehicle
    to take it to a hamfest flea market (hi hi).

    Second, there are some packet BBS's that offer telnet access in
    addition
    to conventional RF. Either way, one must be a licensed amateur radio operator to access them. The former N0KFQ BBS in Branson, Missouri (he
    and his XYL, KB0WSA, are both Silent Keys), and the current NS2B BBS in Penfield, New York, offer both RF and telnet access...RF for those who come in via HF or VHF, and telnet for those who don't have RF gear due to medical issues (I'm a heart patient), or they're too far away to access it.

    The best way to get that is using the Outpost Packet Program suite, by Jim Obenhofer, KN6PE. It has a separate ipserial and iptelnet utility, depending on whether you're going through RF with a TNC, or via telnet without any RF gear. I use the iptelnet utility to access the NS2B BBS, for my packet stuff, as well as running The PCL Net (I'm Net Control and Scribe, with NS2B as alternate Net Control and Scribe, when I can't be there). You can get the Outpost program (Windows) at outpostpm.org

    There are 2 files at http://www.wx4qz.net/elk.htm -- telling how to
    set up Outpost for accessing the NS2B BBS, and info on "The PCL Net". "PCL" was the original name of the net, as it was basically 3 greater
    than signs >>> used to indicate that one was done typing their comments; the equivalent to "over" on phone, or "K" on CW.

    It stood for "Patience Chicken Lips"...because packet is slow (300 baud for HF and 1200 baud for VHF), and the 3 greater than signs look like "chicken lips". (hi hi).

    The PCL Net meets every Monday at 8pm US Eastern Time, except on the weeks that have the following holidays...Easter, Memorial Day, Independence Day, Labor Day, Thanksgiving, Christmas, and New Years.

    We usually have 2 rounds for comments, and I usually post out the
    scribe later that evening (after I run the HotSpot RPi SBC ZumSpot Net on the QuadNet Array (openquad.net)), or sometime the next morning.

    As a side note, another PDF file on that page was a "review" of what
    I called "The E.D. Net"...it was one of the funniest experiences I ever had in ham radio. It proves "with friends like us, you don't need any enemies" (hi hi).

    Years ago, Dave Perry, W4KGU (SK), released five 16-bit ham radio
    doors, which had the following things in common:

    1) They were freeware.
    2) They required a DORINFO1.DEF dropfile. 3) They did NOT have a fossil driver.
    4) They required ANSI graphics to access. 5) If using the QRZDOOR (item C below), they needed the data CD, noted below.

    Here's a quick description of each of them:

    A) BULLET -- a bulletins related door. 26 categories are available, and
    it can be covering any topic...ham radio, weather, health, BBS related, food/cooking, etc. As with the REGSCAN door (noted below), the text had
    to be in 80x24 format per page.

    B) REGSCAN -- a door that had an ASCII copy of Part 97 of the FCC Rules, where you could search for a certain part of the rules. It needed to be formatted to basically an 80x24 page format. That was a tedious process
    to go through to convert that...although I think most PDF viewers will allow you to save the PDF to a textfile. But, it still took awhile to go through the entire file to get the 80x24 format.

    Offhand, I don't recall the last time there was a major update, but I'll take care of that again eventually. As a side note, with "suspect glaucoma" and dry corneas, which caused blurred vision without warning (that caused me to give up driving, and sell my car a year ago), it makes it hard to spend long amounts of time at the computer, with the BBS, or with running ham radio traffic nets.

    C) QRZDOOR -- a door that used the original CD-ROM that was produced by the QRZ.COM website, and was available for purchase. That data is no longer available, so unless you have an older data file (the last one I have for that was from 2008), that door is worthless. You could search by callsign, name, or location, and save the info to a file for download.

    D) WASPORT -- a door to track ones progress in the ARRL WAS (Worked All States) award. Categories were for various bands and modes, plus a separate Sysop defined category.

    I have "internet" for VoIP related modes...mainly for hams living in HOA's, CC&R's, or with antenna restrictions/prohibitions, such as medical or assisted living facilities. As an FCC official noted years ago, "we
    are communicators first, and ham radio operators second". With having congestive heart failure, I operate "internet only", but my license isn't just a piece of paper. I've known many hams who studied to the exam, got their ham radio license, but never got on the air. I have to wonder why they spent all that time and money.

    Just over a month ago, on March 31, 2023, when a nearly EF-4 tornado blasted a 35 mile path of destruction across central Arkansas (54
    injuries and 1 fatality), the hams were using "whatever communications method worked" to get the info to the National Weather Service in Little Rock. If you go on YouTube, and look for "Ryan Hall, Ya'll" (it's a weather geeks paradise), search for "March 31, 2023 outbreak".

    Just after 2pm Central Time, a Tornado Warning was issued for the Little Rock Metro area...then it was upgraded to a Tornado Emergency, just over 25 minutes later. You will see video of the monster tornado (which was about 5 miles west of me in southwest Little Rock), from both storm
    chaser Brett Adair, and from the camera from one of the hospitals in west Little Rock. The WCM (Warnings Coordination Meteorologist) at the
    National Weather Service in North Little Rock (they're at the North
    Little Rock Airport) is Dennis Cavanaugh, KF5VHZ...and he does the
    Skywarn Spotter Training courses done by the National Weather Service in North Little Rock.

    E) ARPD -- a door to work with a TNC (preferably the long gone MFJ 1270 series) and a rig, to allow users to access packet from the Sysop's TNC. The callsign was changed from the Sysop to the user (a separate
    validation file was created by the Sysop to be sure that only licensed hams accessed the door), which then created a logfile, to record all commands typed. It made the user accountable for their transmissions. It also allowed users to use the mailbox that the TNC had, to leave a packet style message to the Sysop. When the user exited the door, the data for the TNC was reset back to the default values (i.e. the Sysop's callsign, etc.).

    For Doors A and B above, having an amateur radio license, for the user or Sysop, was not required. However, for Doors C through E, the Sysop and the user had to have the appropriate class of amateur radio license...and I felt that the ham radio info should be accessed only by hams...although most callsign servers are accessible by anyone on the internet. There are some countries, where the ham radio operator has requested that "their info not be made public".

    Except for the ARPD door (I still have the TNC, but no rig, cable, or antenna for it), the others are on my BBS, and available for download, in ZIP file format.

    For the doors, you can run them under Synchronet with its DOSXTRN utility, and set it up as if it was a regular door (again, using the DORINFO1.DEF dropfile), to get the correct user name...just set it for UART access.

    For Doors A through C noted above, you could use the DOORWAY utility (originally created by Marshall Dudley, now supported by Mike Ehlert),
    and then create a generic DORINFO1.DEF dropfile with the comport at 0 (zero), and John Doe as the user. However, doors D and E require the dropfile with the user name to work properly.

    Daryl, WX4QZ, Sysop
    The Thunderbolt BBS, Little Rock, Arkansas

    ... Ham Radio QRP: When you care the most to send the very least.
    === MultiMail/Win v0.52
    --- SBBSecho 3.20-Win32
    * Origin: The Thunderbolt BBS - Little Rock, Arkansas (1:2320/33)

    Regards,
    Alan Beck
    --- WinPoint 415.0
    * Origin: Another Random *WinPoint* Origin! (1:229/426.36)
  • From Daryl Stout@1:2320/33 to Alan Beck on Sat May 6 04:03:00 2023
    Alan,

    Unfortuenatly I can only offer Telnet access via a terminal on my web
    page (cwnet.org).

    My home BBS is the NS2B BBS, and I normally check the messages on
    Monday, the same day I do the net. The same applies for Winlink, via
    RMS Express...and I rarely get personal mail in either one. But, I
    still have a presence on packet.

    I rarely have time to read the messages or do the doors on my own
    BBS...and I already run 9 nets a week...I think that's more than
    enough in the hobby right now.

    Daryl, WX4QZ

    ... "640K of RAM should be enough for anybody." -- Bill Gates (1980)
    === MultiMail/Win v0.52
    --- SBBSecho 3.20-Win32
    * Origin: The Thunderbolt BBS - Little Rock, Arkansas (1:2320/33)
  • From Ray Quinn@1:214/23 to Alan Beck on Sun May 14 09:53:06 2023

    Hello Alan!

    02 May 23 11:05, you wrote to all:

    //Hello All,//

    Packet radio BBSes are only for confirmed Ham radio operators. it is
    of and about ham radio for hams.

    I run the SJVBBS (San Joaquin Valley BBS) located at 7575 feet abpve sea level on 145.090 and 441.500 (1200 bps). The site is about 7200 feet above the local area (the aforementioned valley). We are using Ubiquiti microwave radio links in the 5 ghz amateur band for links to the home QTH, about 37 miles. We have backup links, also using Ubiquiti radios. but these make a stop off at another repeater site.

    The SJVBBS call sign is W6RAY-4 on RF and W6RAY-3 on NETROM. I currently have only two forwarding partners; one here in California, and another in south Texas, all via Internet, the latter via AMPRnet (AMateur Packet Radio net), or 44Net.

    Usually you need to come in from RF, all I have are 1000 packet
    messages from the internet links from 3 other BBSes.

    SJVBBS is, of course, available locally via RF, but also via the Internet, or more precisely, AMPRnet. I don't know how many messages I have online, but they go back years. As I mentioned earlier, I have two forwarding partners, but I am always looking for more.


    Software is BPQ.

    I am running JNOS (www.langelaar.net/jnos2) on Linux with two KPC3+ TNCs. There is one keyboard node (BLACK:W6SLO-6) across the valley near San Luis Obispo where through which some of the local users there connect.

    I check it every day or so.

    That is the goal, but doesn't always work out that way. I also run an online Synchronet BBS, so, along with work, limits my time. Not to mention the local radio club.


    All I do is get on the bbs by typing bbs at the first prompt, then
    "lm" for list mine to get my personal maail.

    I use Outpost Packet Message Manager (outpostpm.org) to connect via telnet or RF to send and receive messages. I can also use SSH to connect to the server and telnet in "locally." (Can't use SSH over RF, encryption.)

    73 de W6RAY Ray Quinn
    Visalia, CA DM06II
    Ham Shack Hotline 4655

    If the right side of the brain controls the left side of the body,
    then only left handed people are in their right mind.


    --- GoldED+/W64-MSVC 1.1.5-b20180707
    * Origin: Ray's Road Node | Somewhere in California. (1:214/23)
  • From Ray Quinn@1:214/23 to Alan Beck on Sun May 14 10:52:09 2023

    Hello Alan!

    05 May 23 08:20, you wrote to Daryl Stout:

    Unfortuenatly I can only offer Telnet access via a terminal on my web
    page (cwnet.org).

    Don't worry about it. You can only offer what you can.

    It is just like the old daysworkiing from a terminal.

    If you can configure outpost to do telnet.

    As I mentioned in another message, you most definately can. It is quite simple.

    I would be glad to include you on my bbs. Just send me a password via netmail and off you go.

    On its way...

    73 de W6RAY Ray Quinn
    Visalia, CA DM06II
    Ham Shack Hotline 4655
    If the right side of the brain controls the left side of the body,
    then only left handed people are in their right mind.


    --- GoldED+/W64-MSVC 1.1.5-b20180707
    * Origin: Ray's Road Node | Somewhere in California. (1:214/23)
  • From Geno Bushcraft@1:229/426 to Ray Quinn on Sun Oct 8 09:31:22 2023
    All the crossplatforming and use of traditional protocols and AT commands most can use without being a an expert I am interested in.
    It would seem since you can emulate DOS on raspberry Pi computers ,all models, and esp32 MCUs and such that LoRa could cheaply and affordably be intergrated.

    Raspberry Pi is an easy search with lots of support so I won't explain much on it.
    The esp32 is something more interesting and less known. It can be used as a
    man server/client and Host as well as just an assessory if programmed to think its a dialup modem when its a wifi relay, bridge etc.. You can mesh these. Arduino IDE is what I use to write most but their are many ways people write to these/program them. You can even through a browser. Best part. you can get them for a few dollars. they can run ultra lowpower so solar battery banks can work easy as well.*
    I think these would be a great way to create an area (sq miles) or linear network (miles long). LoRa modules are not expensive and alot of devices like SBC computers Orange Pi raspberryPi etc.. have alot of searchable support with perpheral attachment to the GPIO like UART connectivity to add these modules. Pimoroni had a esp8266 IoT Phat they called it. I have one. Its simply an esp8266 connected UART with proper power saftey.

    I do have DVM HAT for a raspberry pi but I dont have my lic so I cant broadcast.

    I listen to alot of RF and also use a DVB-T FM DAB usb Dongle and Gqrx Program on a Rasp Pi or my Baofeng.

    --- Renegade vY2Ka2
    * Origin: Joey, do you like movies about gladiators? (1:229/426)