Hello All!

I got vmodem working finally... well sort of. I can get renegade, pb 217 (only) and maximus to intialize the modem no problem. The problem I see now is that only maximus passes anything to my telnet client. The rest all show connected but blank screen is all I get. Because its more than one bbs software doing this I assume its some setting somewhere for modem perhaps in the setup of the bbs?

I am using netrunner to connect, I have not tried syncterm which I will do later to see if different result.

Regards,

Rick

... Because of BBSing, reading and writing actually pay off!
--- GoldED+/LNX 1.1.5-b20220504
* Origin: Awesome Net- Oregon FTN Hub - www.awesomenet.us (1:105/81)

* In a message originally to All, Rick Smith said:

I got vmodem working finally... well sort of. I can get renegade, pb 217 (only) and maximus to intialize the modem no problem. The problem I see now is that only maximus passes anything to my telnet client. The rest
all show connected but blank screen is all I get. Because its more than one bbs software doing this I assume its some setting somewhere for modem perhaps in the setup of the bbs?

Vhat version of SIO? I am using SIO2k v2.11 I think with VX00 installed and 8 telnet ports and I have pretty much gotten everything to answer telnet calls with both DOS and OS/2 BBS software ..

If you can't get the software to answer calls, try changing the init string to just ATZ and any other hayes commands to manipulate speaker and stuff. hangup string ATH answer string ATA detect RING answer on 2nd RING .. should pretty much cover any situation .. at least in my experience

Good luck .. I am testing out the telnet/news/ftp server of EleBBS/2 currently :D so far everything works as expected.

---
* Origin: internal dimension v2 - telnet://bbs.idbbs.ca (1:229/275)

Vhat version of SIO? I am using SIO2k v2.11 I think with VX00 installed an

^^^^^^^^^^^^^^^^

Wasn't 2.01 beta (like July 2001) the last ver Ray put out?

... On one condition -- that it leads to extreme violence!

--- Renegade v1.31/Exp
* Origin: The Titantic BBS Telnet - ttb.rgbbs.info (1:129/305)

Hello T!

04 Mar 23 19:30, you wrote to Dave Vandermeer:

Vhat version of SIO? I am using SIO2k v2.11 I think with VX00
installed an

^^^^^^^^^^^^^^^^

Wasn't 2.01 beta (like July 2001) the last ver Ray put out?

The last release that I'm aware of was v2.03 from June, 2002.

Andrew

--- GoldED+/LNX 1.1.5-b20230304
* Origin: Phoenix BBS * phoenix.bnbbbs.net (1:320/219)

Hello Dave!

Saturday March 04 2023 16:18, you wrote to me:

* In a message originally to All, Rick Smith said:

I got vmodem working finally... well sort of. I can get renegade,
pb 217 (only) and maximus to intialize the modem no problem. The
problem I see now is that only maximus passes anything to my telnet
client. The rest all show connected but blank screen is all I get.
Because its more than one bbs software doing this I assume its some
setting somewhere for modem perhaps in the setup of the bbs?

Vhat version of SIO? I am using SIO2k v2.11 I think with VX00
installed and 8 telnet ports and I have pretty much gotten everything
to answer telnet calls with both DOS and OS/2 BBS software ..

If you can't get the software to answer calls, try changing the init string to just ATZ and any other hayes commands to manipulate speaker
and stuff. hangup string ATH answer string ATA detect RING answer on
2nd RING .. should pretty much cover any situation .. at least in my experience

Can you share the enty in your config.sys? Thats where I think mine is failing...

Regards,

Rick

... I don't do drugs...BBSing is my escape from reality
--- GoldED+/LNX 1.1.5-b20220504
* Origin: Awesome Net- Oregon FTN Hub - www.awesomenet.us (1:105/81)

Hello Rick,

06 Mar 23 06:54, you wrote to Dave Vandermeer:

Hello Dave!

Saturday March 04 2023 16:18, you wrote to me:

* In a message originally to All, Rick Smith said:

I got vmodem working finally... well sort of. I can get renegade,
pb 217 (only) and maximus to intialize the modem no problem. The
problem I see now is that only maximus passes anything to my
telnet client. The rest all show connected but blank screen is
all I get. Because its more than one bbs software doing this I
assume its some setting somewhere for modem perhaps in the setup
of the bbs?

Vhat version of SIO? I am using SIO2k v2.11 I think with VX00
installed and 8 telnet ports and I have pretty much gotten
everything to answer telnet calls with both DOS and OS/2 BBS
software ..

If you can't get the software to answer calls, try changing the
init string to just ATZ and any other hayes commands to
manipulate speaker and stuff. hangup string ATH answer string ATA
detect RING answer on 2nd RING .. should pretty much cover any
situation .. at least in my experience

Can you share the enty in your config.sys? Thats where I think mine is failing...

my config.sys:

device=C:\sio2k\vmodem.sys logfile=C:\sio2k\sio2k.log NoPause nPorts=8 device=C:\sio2k\uart.sys logfile=C:\sio2k\sio2k.log
device=C:\sio2k\sio2k.sys logfile=C:\sio2k\sio2k.log
device=C:\sio2k\vsio2k.sys logfile=C:\sio2k\vsio2k.log vIrqList(3,4)


Regards,
--
dp

telnet://bbs.roonsbbs.hu:1212 <<=-

... 3:34pm up 23 days, 0:33:07, load: 88 processes, 286 threads.
--- GoldED/2 1.1.4.7+EMX
* Origin: Roon's BBS - Budapest, HUNGARY (2:371/52)