1. Forum
  2. FSXnet
  3. FSX BBS

  • ntvdmx64 no com port

    From klunk@21:1/124 to All on Sun Dec 14 12:17:26 2025
    Hi all,
    When I open legend of the red dragon door using NTVDMx64 I get a unable to open com port error. Has anyone come across this before? The door runs perfect under win 10 32 bit with NTVDM. But trying to move to win 10 64 bit.
    Any input appreciated.
    L8rz
    Klunk

    ... Old computers make great boat anchors

    --- Mystic BBS v1.12 A48 (Windows/32)
    * Origin: Who Dares Wins Amiga BBS (21:1/124)
  • From Bucko@21:4/131 to klunk on Sun Dec 14 08:12:27 2025
    On 14 Dec 2025, klunk said the following...

    Hi all,
    When I open legend of the red dragon door using NTVDMx64 I get a unable
    to open com port error. Has anyone come across this before? The door
    runs perfect under win 10 32 bit with NTVDM. But trying to move to win
    10 64 bit. Any input appreciated.
    L8rz
    Klunk

    First thing I would ask is, does the computer have a com port? If not just download a virtual com port program and create one, because I run my Door Server in a Virtual machine and my host system does not have a serial port. I use a program called Virtual Serial Ports Emulator VSPE for short, its a pay program but does the job very nicely.. I am sure there are tons of free ones if this is indeed the issue..


    |11 Bucko |14- |06Wrong Number Family Of BBS' |07- |03www.wrgnbr.com

    ... (A)bort, (R)etry, (I)nfluence with large hammer.

    --- Mystic BBS v1.12 A48 (Linux/64)
    * Origin: The Wrong Number Family Of BBS' - Wrong Number ][ (21:4/131)
  • From klunk@21:1/124 to Bucko on Sun Dec 14 17:15:03 2025
    First thing I would ask is, does the computer have a com port? If not

    No com port but runs run under win 10 32 bit with no com port with no issues. L8rz
    Klunk

    ... A Skydiver is taken by the gravity of his situation.

    --- Mystic BBS v1.12 A48 (Windows/32)
    * Origin: Who Dares Wins Amiga BBS (21:1/124)
  • From Bucko@21:4/131 to klunk on Mon Dec 15 18:50:48 2025
    On 14 Dec 2025, klunk said the following...

    First thing I would ask is, does the computer have a com port? If not

    No com port but runs run under win 10 32 bit with no com port with no issues. L8rz
    Klunk

    Gotcha, oh well I gave it a shot.. ;)


    |11 Bucko |14- |06Wrong Number Family Of BBS' |07- |03www.wrgnbr.com

    ... Everyone has a photographic memory. Some don't have film.

    --- Mystic BBS v1.12 A48 (Linux/64)
    * Origin: The Wrong Number Family Of BBS' - Wrong Number ][ (21:4/131)
  • From Fzf@21:1/149 to klunk on Mon Dec 15 20:35:43 2025
    Re: ntvdmx64 no com port
    By: klunk to All on Sun Dec 14 2025 12:17 pm

    When I open legend of the red dragon door using NTVDMx64 I get a unable to open com port error. Has anyone come across this before? The door runs perfect under win 10 32 bit with NTVDM. But trying to move to win 10 64 bit. Any input appreciated.

    You're leaving out many details. But based on this:

    -.- Mystic BBS v1.12 A48 (Windows/32)

    I'm making the assumption that you are using the DX menu command and in turn were using DOSXTRN/SBBSEXEC to provide a virtual UART. This only functions under Win32. Under Windows 64 that COM port is not present and thus Windows will throw the error when the door attempts to open it.

    You'll need to first reconfigure LORD to use FOSSIL. Then, download and install NetFoss64 (start with version 1.25). Once you have both set up, change the menu to run command DD to call nf64.bat and in turn load LORD.
    --- SBBSecho 3.23-Win32
    * Origin: The Fool's Quarter, fqbbs.synchro.net (21:1/149)
  • From klunk@21:1/124 to Fzf on Tue Dec 16 22:36:08 2025
    install NetFoss64 (start with version 1.25). Once you have both set up, change the menu to run command DD to call nf64.bat and in turn load LORD.

    Done that, script runs gives no error but the door doesn't run. Tried it with different doors and get the same result. The doors run ok from the command line so ntvdmx64 is working ok. Not sure if it is win 10 21h2 64 bit ltsc causing problems

    ... A house is a place to keep your stuff while you go out and get more stuff

    --- Mystic BBS v1.12 A48 (Windows/32)
    * Origin: Who Dares Wins Amiga BBS (21:1/124)
  • From Shurato@21:2/148 to klunk on Tue Dec 16 17:47:00 2025

    Hi all,
    When I open legend of the red dragon door using NTVDMx64 I get a unable to open com port error. Has anyone come across this before? The door runs perfect under win 10 32 bit with NTVDM. But trying to move to win 10 64 bit. Any input appreciated. L8rz Klunk

    You're loading the fossil driver, then the door with parameters, correct? You've got lord configured for fossil support in each node? I'm doing something similar, but using win 11 64 bit with EleBBS. My command looks
    like:

    c:\ele\nf\nf.bat c:\ele\doors\lord\start.bat *N *ULORD

    start.bat is standard. LORDCFG has fossil driver and dorinfo1.def as drop files for each node.

    ** LORD 4.07 Node Configure ** ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍHit F1 for Help ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ


    => (1) Node Number : 1
    (2) BBS Name : Shurato's Heavenly Sphere
    (3) BBS Software : QBBS
    (4) Path to dropfile : C:\ELE\NODE1
    (5) Fossil / Internal : Using regular fossil driver
    (6) Locked port speed : 115200
    (7) Comport : Read from dropfile
    (A) The status bar is : Enabled!
    (9) Current Multitasker : Autodetect
    (A) Use EXTRA time slicing : No
    (B) Status Bar Colors

    (C) Copy setup from another RT game (TEOS and LORD2)


    Hope this helps!

    --
    Shurato, Sysop Shurato's Heavenly Sphere (ssh, telnet, pop3, ftp,nntp,
    ,wss) (Ports 22,23,110,21,119,999)


    *** THE READER V4.50 [freeware]
    ---
    * Origin: Shurato's Heavenly Sphere telnet://shsbbs.net (21:2/148)
  • From Shurato@21:2/148 to klunk on Tue Dec 16 17:49:00 2025
    Oh, I'm using nf.bat instead of nf64.bat as I didn't want to have to change
    200 menu items.. nf.bat includes the following:

    c:\ele\nf\ansi.com
    c:\ele\nf\netfos64.com
    rem ** If running a DOS based BBS (or Mystic), add " %1" to the end of above line **
    if errorlevel 1 goto end
    c:\ele\nf\netcom.exe %1 %2 %3 %4 %5 %6 %7 %8 %9
    c:\ele\nf\netfos64.com /u
    :end

    --
    Shurato, Sysop Shurato's Heavenly Sphere (ssh, telnet, pop3, ftp,nntp,
    ,wss) (Ports 22,23,110,21,119,999)


    *** THE READER V4.50 [freeware]
    ---
    * Origin: Shurato's Heavenly Sphere telnet://shsbbs.net (21:2/148)