• different address in FROM field

    From pweck@21:3/113 to All on Sat Jun 22 15:41:49 2024
    Hi
    seeing if there is a way to change thr FROM field in a netmail message. i hear tbat synchronet has the ability to do this...

    ... Do vegetarians eat animal crackers?

    --- Mystic BBS v1.12 A48 (Raspberry Pi/32)
    * Origin: Pweck's Retreat BBS (21:3/113)
  • From Warpslide@21:3/110 to pweck on Sun Jun 23 03:29:46 2024
    On 22 Jun 2024, pweck said the following...

    seeing if there is a way to change thr FROM field in a netmail message.
    i hear tbat synchronet has the ability to do this...

    I believe in Mystic the From name is based on your user account and whether the netmail base is set to use Real Names or not.

    If you wanted to put whatever you wanted in the From field you'd have to use something like GoldEd which you can use alongside Mystic.


    Jay

    ... Fear is no great respecter of reason

    --- Mystic BBS v1.12 A49 2024/05/29 (Linux/64)
    * Origin: Northern Realms (21:3/110)
  • From TheNerd@21:1/230 to pweck on Sun Jun 23 05:48:15 2024
    seeing if there is a way to change thr FROM field in a netmail message.
    i hear tbat synchronet has the ability to do this...


    By change the from field I assume you mean at the time of posting a message? mutil will do this if you write out the message first and then post it using the program.

    If you mean an existing message.. dunno sorry.


    --- TheNerd -/- Sysop: NerdRage BBS -/- telnet: nerdragebbs.ddns.net

    --- Mystic BBS v1.12 A48 (Windows/32)
    * Origin: NerdRage BBS -.- telnet: nerdragebbs.ddns.net (21:1/230)
  • From pweck@21:3/113 to TheNerd on Sun Jun 23 08:19:38 2024
    seeing if there is a way to change thr FROM field in a netmail messag i hear tbat synchronet has the ability to do this...


    By change the from field I assume you mean at the time of posting a message? mutil will do this if you write out the message first and
    then post it using the program.

    I had a fidonet address that no longer is a part of fidonet (NET299) and have had to get a new address (NET220). I needed to be able to areafix/filefix to remove all areas that I had applied to. However I was unable to find a way to do it with Mystic. I even tried setting up a FDN for NET299 with a netmail message base and added it to my nodelist...no such luck, and maybe that ability is not included within mystic

    thanks

    ... A SQL query walks into a bar and sees two tables. Asks: 'Can I join you?'

    --- Mystic BBS v1.12 A48 (Raspberry Pi/32)
    * Origin: Pweck's Retreat BBS (21:3/113)
  • From Accession@21:1/200 to pweck on Sun Jun 23 13:11:04 2024
    Hello pweck,

    On Sun, Jun 23 2024 13:19:38 -0500, you wrote:

    I had a fidonet address that no longer is a part of fidonet (NET299) and have had to get a new address (NET220). I needed to be able to areafix/filefix to remove all areas that I had applied to. However I was unable to find a way to do it with Mystic. I even tried setting up a FDN for NET299 with a netmail message base and added it to my nodelist...no such luck, and maybe that ability is not included within mystic

    I'm guessing you removed your 299 address from your Mystic system *before* attempting to do this?

    Since this is temporary, try re-entering the original address as one of your system AKAs, setup a temporary separate netmail area for only that address (so it can be removed after without messing anything else up), then while IN that netmail area, send a netmail to your uplink's areafix with your password as the subject line, and "-ALL" without quotes in the message body (since Mark uses Synchronet). Then you can remove the 299 address and netmail area once again.

    I'm positive it can be done with Mystic, either way.

    Regards,
    Nick

    ... Take my advice, I don't use it anyway.
    --- slrn/pre1.0.4-9 (Linux)
    * Origin: _thePharcyde distribution system (Wisconsin) (21:1/200)
  • From pweck@21:3/113 to Accession on Mon Jun 24 04:41:15 2024
    I had a fidonet address that no longer is a part of fidonet (NET299) a have had to get a new address (NET220). I needed to be able to areafix/filefix to remove all areas that I had applied to. However I w unable to find a way to do it with Mystic. I even tried setting up a F for NET299 with a netmail message base and added it to my nodelist...n such luck, and maybe that ability is not included within mystic

    I'm guessing you removed your 299 address from your Mystic system
    *before* attempting to do this?

    Since this is temporary, try re-entering the original address as one of your system AKAs, setup a temporary separate netmail area for only that address (so it can be removed after without messing anything else up), then while IN that netmail area, send a netmail to your uplink's areafix with your password as the subject line, and "-ALL" without quotes in the message body (since Mark uses Synchronet). Then you can remove the 299 address and netmail area once again.

    I'm positive it can be done with Mystic, either way.

    thankfully mark took care if them on his end. i did what you mentioned here without luck. in the 299 area i did attempt to send netmail, but the reply still came back to 220...i even temporsrily added the 299 back to my nodelist but no luck. oh well maybe ill write a mpl to try it out.
    thanks for your help!

    ... How do I set my laser printer to stun?

    --- Mystic BBS v1.12 A48 (Raspberry Pi/32)
    * Origin: Pweck's Retreat BBS (21:3/113)
  • From Accession@21:1/200 to pweck on Mon Jun 24 13:31:26 2024
    Hello pweck,

    On Mon, 24 Jun 2024 04:41:14 -0500, you wrote to me:

    I'm positive it can be done with Mystic, either way.

    thankfully mark took care if them on his end. i did what you mentioned here without luck. in the 299 area i did attempt to send netmail, but the reply still came back to 220...i even temporsrily added the 299 back to my nodelist but no luck. oh well maybe ill write a mpl to try it out. thanks for your help!

    If the reply came back to 220, then you sent the netmail as 220 still. You may not have known you did it, but that's how netmail works.

    Either way, you shouldn't need an MPL to do any of that for you. Now that you have 220 shut off, get rid of any configuration you have for it on your BBS, and 229 should be all that's left for Fidonet.

    Regards,
    Nick

    ... Take my advice, I don't use it anyway.
    --- GoldED+/LNX 1.1.5-b20240309
    * Origin: _thePharcyde distribution system (Wisconsin) (21:1/200)
  • From pweck@21:3/113 to Accession on Mon Jun 24 17:04:36 2024
    reply still came back to 220...i even temporsrily added the 299 back nodelist but no luck. oh well maybe ill write a mpl to try it out. t for your help!

    If the reply came back to 220, then you sent the netmail as 220 still.
    You may not have known you did it, but that's how netmail works.

    Either way, you shouldn't need an MPL to do any of that for you. Now
    that you have 220 shut off, get rid of any configuration you have for it on your BBS, and 229 should be all that's left for Fidonet.


    thanks, ya i probably did something wrong, but now everything is setup correctly.

    ... A penny saved is not very much

    --- Mystic BBS v1.12 A48 (Raspberry Pi/32)
    * Origin: Pweck's Retreat BBS (21:3/113)