Is the PostTextFiles capability in mutil supposed to work with QWK networks? I have it set up to post my add to DOVE-Net. It indeed posts the message locally, and I can see it trigger the qwkpoll event, however I don't see the message show up on other BBSes that carry DOVE-Net (such as my main board).

This is what my PostTextFiles section in mutil.ini looks like (with totalfiles=3 and this is the 3rd file to be auto-posted):

file3_name = dc-ad.ans
file3_baseidx = 5
file3_from = codefenix
file3_to = All
file3_subj = [ANSI] dawnCHAOTIC
file3_addr = 0:0/0
file3_delfile = false

I wonder if file3_addr is the issue. I've tried several different things here, like the name of the network (VERT), my own qwk ID (DCHAOTIC), and they all seem to lead to the same outcome of not actually sending the message out.

|15 þ ù ú codefenix ú ù ú ConstructiveChaos BBS ú ú ù þ þ
|08 þ þ ù (https/telnet/ssh)://conchaos.synchro.net ú ù þ
|07

... PhD = Piled high and Deep. - K. Rhodes

--- Mystic BBS v1.12 A49 2024/05/29 (Linux/64)
* Origin: 2o fOr beeRS bbs>>>20ForBeers.com:1337 (21:2/150)

Hello Codefenix,

On Sun, Nov 24 2024 13:11:55 -0600, you wrote ..

Is the PostTextFiles capability in mutil supposed to work with QWK
networks? I have it set up to post my add to DOVE-Net. It indeed
posts the message locally, and I can see it trigger the qwkpoll
event, however I don't see the message show up on other BBSes that
carry DOVE-Net (such as my main board).

I wonder if file3_addr is the issue. I've tried several different
things here, like the name of the network (VERT), my own qwk ID
(DCHAOTIC), and they all seem to lead to the same outcome of not
actually sending the message out.

FYI, I haven't seen anything posted by you in the Dovenet -
Advertisements echo. However, I see advertisements posted by other
Mystic systems in there, so I doubt it's a Mystic issue.

When 'it triggers the qwkpoll event' do you actually see your system
connect to VERT in the logs and see a packet leave your system successfully?

I wouldn't think the address would matter, as that's not a QWK thing. If anything, 0:0/0 would probably be the correct setting there. Anything
posted locally, including auto-posts, to your Dovenet areas should be
sent to VERT if everything is setup correctly between you and the QWK hub.

Are any of your other messages posted to Dovenet getting out? Maybe
there's a configuration error somewhere that would affect more than just
the messages you're trying to auto-post..?

Regards,
Nick

... He who laughs last, thinks slowest.
--- SBBSecho 3.23-Linux
* Origin: _thePharcyde telnet://bbs.pharcyde.org (Wisconsin) (21:1/700)

When 'it triggers the qwkpoll event' do you actually see your system connect to VERT in the logs and see a packet leave your system successfully?
[...]
Are any of your other messages posted to Dovenet getting out?

Yes, I do see the connections taking place in the qwkpoll.log. However, something I failed to notice until today is the log does not contain any "Exported @VERT.rep -> x msgs" lines with a timestamp which would coincide with the times when mutil ran. The only lines showing 1 or more messages exported are for the few messages I posted manually.

Not sure whether I'm on the right track, but I decided to try disabling the "Send QWK network mail" semaphore event in the Event Editor, and instead just run the "Poll QWK netowrk" event hourly. After making this change, I tried running mutil again to post the ad. When the event ran at the top of the hour, I did indeed see "Exported @VERT.rep -> 1 msgs" in qwkpoll.log. So I think I might be making progress (?), event though I haven't seen the message appear in the network yet (maybe it takes a bit to flow through Vert).

|12 þ ú ú [ codefenix ú/ú dawnCHAOTIC ] ú þ þ
|04 þ þ ú [ conchaos.synchro.net:2300 ] ú ú þ
|07

... A Mystic asking for a hot-dog: "Make me one with everything"

--- Mystic BBS v1.12 A48 (Windows/64)
* Origin: dawnCHAOTIC: telnet://conchaos.synchro.net:2300 (21:4/141.1)

Hello Codefenix,

On Mon, Nov 25 2024 11:57:36 -0600, you wrote ..

Not sure whether I'm on the right track, but I decided to try
disabling the "Send QWK network mail" semaphore event in the Event
Editor, and instead just run the "Poll QWK netowrk" event hourly.
After making this change, I tried running mutil again to post the
ad. When the event ran at the top of the hour, I did indeed see
"Exported @VERT.rep -> 1 msgs" in qwkpoll.log. So I think I might be
making progress (?), event though I haven't seen the message appear
in the network yet (maybe it takes a bit to flow through Vert).

There may have been some kind of QWK bug in A48. If possible, upgrade to
the latest alpha and see if enabling the semaphore event works
afterwards. If not, feel free to post the event to verify it's correct.

Looks like you're on the right track now. I see an ad from you posted
with this timestamp:

Fri, 22 Nov 2024 03:34:18 -0500

Regards,
Nick

... He who laughs last, thinks slowest.
--- SBBSecho 3.23-Linux
* Origin: _thePharcyde telnet://bbs.pharcyde.org (Wisconsin) (21:1/700)

Looks like you're on the right track now. I see an ad from you posted with this timestamp:

Fri, 22 Nov 2024 03:34:18 -0500

That is indeed when my auto-posts last ran. However, that's probably actually the ad for ConstructiveChaos, my Sync board. If there isn't also one for dawnCHAOTIC shortly after, then I still have some QWK problem I need to sort out.

I'll take you advice and look out for a new alpha version. Or maybe I'll just post them from my Sync board since I know that works. :D

Thanks for your time looking at this with me!

|12 þ ú ú [ codefenix ú/ú dawnCHAOTIC ] ú þ þ
|04 þ þ ú [ conchaos.synchro.net:2300 ] ú ú þ
|07

... A program is used to turn data into error messages.

--- Mystic BBS v1.12 A48 (Windows/64)
* Origin: dawnCHAOTIC: telnet://conchaos.synchro.net:2300 (21:4/141.1)

Hello codefenix,

On Tue, Nov 26 2024 12:26:05 -0600, you wrote:

That is indeed when my auto-posts last ran. However, that's probably
actually the ad for ConstructiveChaos, my Sync board. If there isn't
also one for dawnCHAOTIC shortly after, then I still have some QWK
problem I need to sort out.

Ah, you're right. There was no ad for "dawnCHAOTIC" that I can see.

I'll take you advice and look out for a new alpha version. Or maybe
I'll just post them from my Sync board since I know that works. :D

No need to keep a look out.

https://mysticbbs.com/downloads/prealpha/

Make sure to read the whatsnew.txt to make sure it's a seamless upgrade from your version to the current one, or if there are steps you need to take to do so. Hopefully it's as easy as running the upgrade executable or whatever it was.

Thanks for your time looking at this with me!

Of course! No problem at all.

Regards,
Nick

... He who laughs last, thinks slowest.
--- SBBSecho 3.23-Linux
* Origin: _thePharcyde telnet://bbs.pharcyde.org (Wisconsin) (21:1/700)

Hello codefenix,

On Tue, 26 Nov 2024 13:26:04 -0500, you wrote to me:

That is indeed when my auto-posts last ran. However, that's probably actually the ad for ConstructiveChaos, my Sync board. If there isn't
also one for dawnCHAOTIC shortly after, then I still have some QWK
problem I need to sort out.

I'll take you advice and look out for a new alpha version. Or maybe I'll just post them from my Sync board since I know that works. :D

Thanks for your time looking at this with me!

For the record, I saw an advertisement for your Mystic board in Dovenet this morning, during my newscan.

Not sure what you did differently, but it looks like your origin line is FTN based (a QWK origin line wouldn't have "(0:0/0)" at the end of it). So maybe that's a good spot to take a look for any configuration issues, too.

Regards,
Nick

... "He who laughs last, thinks slowest."
--- GoldED+/LNX 1.1.5-b20240309
* Origin: The Pharcyde ~ telnet://bbs.pharcyde.org (Wisconsin) (21:1/200)

Re: Mutil PostTextFiles for QWK Networks
By: Accession to codefenix on Fri Nov 29 2024 06:56 am

For the record, I saw an advertisement for your Mystic board in Dovenet this morning, during my newscan.

Thanks for confirming! I saw it from my Sync board as well.

Not sure what you did differently, but it looks like your origin line is FTN based (a QWK origin line wouldn't have "(0:0/0)" at the end of it). So maybe that's a good spot to take a look for any configuration issues, too.

Yes, that does make sense. 0:0/0 was a dummy value I put in the file1_addr while troubleshooting, and I'll change this for the next post.

The only other thing I did differently was make a small edit to the message file itself, so I wonder if there's some duplicate checking logic that was keeping the old message from being exported. I'll see what happens next time.

Thanks again!

|15 þ ù ú codefenix ú ù ú ConstructiveChaos BBS ú ú ù þ þ
|08 þ þ ù (https/telnet/ssh)://conchaos.synchro.net ú ù þ
|07

...I used to be an agnostic, but now I'm not so sure.
--- SBBSecho 3.23-Win32
* Origin: -=[conchaos.synchro.net | ConstructiveChaos BBS]=- (21:4/141)

Hello Codefenix,

On Fri, Nov 29 2024 09:52:36 -0600, you wrote:

Yes, that does make sense. 0:0/0 was a dummy value I put in the
file1_addr while troubleshooting, and I'll change this for the next
post.

Ah, got it. I assume file1_addr is something in mutil.ini? I'd guess you can probably blank that out for a QWK networked post. Otherwise, in "mystic -cfg" > Editors > Message Base Editor under the "Network" header, all of your Dovenet areas should be labeled "QwkNet". If they're not, and show 0:0/0 instead, that may be the issue.

The only other thing I did differently was make a small edit to the
message file itself, so I wonder if there's some duplicate checking
logic that was keeping the old message from being exported. I'll see
what happens next time.

Sure. That, or you actually did send it out and VERT (although I thought you originally said it wasn't going out at all? I don't remember now, lol) caught it as a dupe. Either way, looks like you have it working a bit better now!

Regards,
Nick

... He who laughs last, thinks slowest.
--- SBBSecho 3.23-Linux
* Origin: _thePharcyde telnet://bbs.pharcyde.org (Wisconsin) (21:1/700)